7. When you choose the “Raw” for the Protocol, enter the printer SOCKET PORT as the “Port Number” and click the [OK] button. The default port number is “8000”. Do not check the “SNMP Status Enabled” checkbox.
When you choose the “LRP” for the Protocol, enter any queue name (e.g. “lpr”) and click the [OK] button. Do not check the “LPR Byte Counting Enabled” and “SNMP Status Enabled” checkboxes.
Note: When the status monitor feature is used with the
8. Click the [Next] button, and [Finish] button.
9. When the “Add Standard TCP/IP Printer Port Wizard” is finished, a new port is added.
- 95 -
