Toshiba BDRV-WBX8-Z31 Version 7.2.4 M-3 manual CENTRO. Mode → ECP Plug & PLAY→ on

2.7Installation under Windows 2000 (Parallel interface with Plug & Play Enabled)

Note: Proper operation is not guaranteed on the PC running Windows 2000.

1. Connect the printer to the PC with a parallel interface cable.

2. Turn on the printer.

3. Set the printer parameters in the system mode.

B-SX4, B-SX4-CN, B-SX5, and B-SX5-CN

CENTRO. MODE → ECP

PLUG & PLAY→ ON

B-SA4G, B-SA4G-CN, B-SA4T, B-SA4T-CN, B-852-R, B-452-R, B-SX6T-R, B-SX8T-R, B-EX4T1-G, B-EX4T1-T, B-EX4T2-G, B-EX4T2-T, B-EX4T2-H

PLUG & PLAY → ON

Note: For the parameter setting procedure, refer to Section 6.2 Parameter Setting on the Printer.

4. Turn on the PC.

Note: Log on as the user with administrative privilege.

5. After the system started, new hardware is detected. When the “Welcome to the Found New Hardware Wizard” is displayed, click the [Next] button.

6. Select “Search for a suitable driver for my device (recommended)”, then click the [Next] button.

- 40 -