Toshiba RAV-SM560XT-E, RAV-SM800XT-E Install the indoor unit, Install the Suspension bolts

2.Set the Air inlet grille arm to the axis of the Front panel.

3.Insert the Grille stopper to the correct position and fix it securely with screws.

4.Push the Air inlet grille to the correct position.

<Install the indoor unit>

1.	Remove the Side covers and the Installation plate
	1.
2.	Insert the Suspension bolts into the metal fittings of
	the indoor unit.

Air inlet grille arm

Axis of the Front panel

3.	Set to nuts, spring washers and washers on both
	sides of the metal fittings and then move the indoor
	unit backward.
4.	Secure it with the M10 Nuts. (4 pcs.)
5.	Attach the Side covers to the unit.

Rib

Fig. 9-5-6

Suspension bolt

Side cover

1Installation plate

Suspension bolt

9-5-4. Under Ceiling Installation

For the installation of the indoor unit use the Paper pattern, which is inside the package box cover.

<Install the Suspension bolts>

•Install the Suspension bolts so that it can support the indoor unit.

3 2

4

Side cover

Nut (M10)

Fig. 9-5-9

240 mm or more

1093
1015
		330
140	60	235mm	ormore
Fig. 9-5-7

<Condition for Installation>

•The unit must not decline more than 15 mm in either axis.

15 mm

15 mm

•Adjust distance to ceiling before installation.

mm	25~30mm	Suspension	Nut (M10)
40~45		bolt
		Washer	Spring
			washer

	Suspension
	bolt (M10)
Spring	Washer
washer	Nut (M10)

Fig. 9-5-8

Fig. 9-5-10

<Piping and Drain Hose Installation>

•The piping direction can be 4 ways as illustrated.

•The Drain hose is only one way.

Upper piping

Rear upper piping

Side piping

Rear piping Drain hose

Fig. 9-5-11

– 33 –