No.

Part name

 

Procedure

 

Remarks

 

 

 

 

‚ Front cabinet

1. Detachment

Motor support

 

 

1)

Perform work of item 1 of •.

 

 

 

 

 

 

2)

Remove screws (ST1T Ø4 x 10L, 2 pcs.)

 

 

 

 

 

of the front cabinet and the inverter cover.

 

 

 

 

3)

Take off screws of the front cabinet and

 

 

 

 

 

the bottom plate. (ST1T Ø4 x 10L 3 pcs.)

 

 

 

 

4)

Take off screws of the front cabinet and

 

 

 

 

 

the motor support.

 

 

 

 

 

(ST1T Ø4 x 10L, 2 pcs.)

 

 

 

 

 

• The left side of the front side if made to

Front cabinet

For single-phase type models,

 

 

 

insert to the rear cabinet, so remove it

 

also take off this screw

 

 

 

pulling upward.

 

 

 

 

3. Attachment

Front cabinet (Left side)

 

 

 

 

 

 

1)

Insert hook at the left side of the front side

 

 

 

 

 

into the rear cabinet.

 

 

 

 

2)

Hook the lower part at the right side of the

Slit

Claw

 

 

 

front to concavity of the bottom plate.

 

 

 

 

 

 

 

 

Insert the hook of the rear cabinet into the

 

 

 

 

 

slit of the front cabinet.

 

 

3)Attach the removed screws to the original positions.

Slit

Hook

Cord clamp

Front cabinet

Concavity at bottom plate

Lower slit

– 66 –

Page 67 Page 69
Page 68
Image 68
Toshiba RAV-SM800XT-E, RAV-SM560XT-E service manual Procedure Remarks
Page 67 Page 69
Top Page Image Contents