HW Setup

Device Config

Device Configuration

This option lets you set the device configuration.

All Devices

BIOS sets all devices.

Setup by OS

Operating system sets devices that it can control

 

(Default).

Parallel/Printer

Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.

ECP

Sets the port type to Extended Capabilities Port

 

(ECP). For most printers, the port should be set

 

to ECP (Default).

Standard

This setting should be used with some other

Bi-directional

parallel devices.

 

USB

USB KB/Mouse Legacy Emulation

Use this option to enable or disable USB keyboard/mouse legacy emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB KB/Mouse Legacy Emulation item to Enabled.

Enabled

Enables the USB KB/Mouse Legacy Emulation

 

function (Default).

Disabled

Disables the USB KB/Mouse Legacy Emulation

 

function.

USB-FDD Legacy Emulation

Use this option to enable or disable USB floppy disk drive legacy emulation. If your operating system does not support USB, you can still use a USB floppy disk drive by setting the USB-FDD Legacy Emulation item to Enabled.

Enabled

Enables the USB floppy disk drive legacy

 

emulation function (Default).

Disabled

Disables the USB floppy disk drive legacy

 

emulation function.

7-8

User’s Manual

Page 162
Image 162
Toshiba TECRA M5 user manual Device Config, Parallel/Printer