Optional Devices

3.Turn the monitor’s power on.

4.Turn the computer’s power on.

When you turn on the power, the computer automatically recognizes the monitor and determines whether it is color or monochrome.

However, the Windows Desktop appears on a display device that you used last time to shut down your computer, if the display device exists when you turn on the power.

To change the display settings, press Fn + F5. If you disconnect the external monitor before you turn the computer’s power off, be sure to press Fn + F5 to switch to the internal display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change the display setting.

TV

You can connect a television set to the Video out jack on the computer. Follow the steps below.

Using the TOSHIBA Assist button or TOSHIBA Presentation button

1.Connect the TV adaptor cable’s S-Video plug to the Video-out jack on the computer.

TV adaptor cable

Video-out jack

Figure 8-18 Connecting the S-Video cable to the Video-out jack

2.Connect the TV adaptor cable’s S-Video plug to the Video-out jack on the TV.

3.Press the TOSHIBA Assist button or TOSHIBA Presentation button.

You can use the hot keys Fn + F5 to change the display device. Refer to Chapter 5, The Keyboard.

To open "TOSHIBA Controls" properties, click Start, click Control Panel, and click Printers and Other Hardware, select "TOSHIBA Controls", and set "TV OUT" to "TOSHIBA Assist button" or "TOSHIBA Presentation button" on "Buttons" tab.

8-16

User’s Manual

Page 182
Image 182
Toshiba TECRA M5 user manual Connecting the S-Video cable to the Video-out jack