4-32 User’s Manual
Operating Basics
2. Plug the other end of the modular cable into a telephone jack.
Figure 4-12 Connecting the internal modem

Disconnecting

To disconnect the internal modular cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer’s modem jack in the same
manner.
Wireless communications
The computer’s wireless communication function supports both Wireless
LAN and Bluetooth devices.
All models are provided with Wireless Communication switch. Some
models are equipped with both Wireless LAN and Bluetooth functions.
Modular cable
Modem jack
Telephone jack
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as an optical drive or hard disk drive
connected to a 16-bit PC card, you might experience the following modem
problems:
■Modem speed is slow or communication is interrupted.
■Skips may occur in sound.
■The Wake-up on Wireless function is effective only when it is
connected with AP. This function becomes invalid when the connection
is cut.