Toshiba VM4050 manual Message Options

8.In the Message screen, use your keypad to enter a text message (or press the left softkey to select from Preset Messages) and

press OK . (See “Entering Text” on page 26.)

9.In the Sending Options screen, you can select various options to your message. (See “Message Options” below.)

10.To send the message, select Send (left softkey).

Note: If you attempt to send a text message in analog mode or no service, the message cannot be sent and you will be prompted to confirm that you would like to send the message when the digital service is available. Select Yes to save the message as a Pending message to your outbox; select No to save the message as a Canceled message.

Message Options

The Sending Options screen displays the following options for your message. To select an option, highlight it and press OK .

Edit Recipient List to add or change the recipients.

Edit Message to change your text message.

Priority to select the message priority Normal or Urgent.

Insert Signature to insert your signature that you preset (see “Setting Up for the Messaging” on page 171).

Callback Number to select On (adding your default callback number to the message) or Off. You may also edit it by selecting Edit (right softkey) to apply only to the current message. (See “Setting Up for the Messaging” on page 171.)

Save Message to save your message to your Outbox without sending it. (This will exit the Messaging menu and return to standby mode.)

Save to Preset Msg. to save a part of your message as a preset message. Use your navigation key to place the cursor where you would like to begin saving the message, select Start (left softkey), use your navigation key to highlight the section of the message

you want to save, select End (left softkey) when you're finished, and press OK to save the selected passage.

Section 3: Using PCS Service Features

3B: PCS Vision 165