Toshiba VM4050 Dialing From the Internal Phone Book, Using One-Touch/Two-Touch Speed Dialing

Dialing From the Internal Phone Book

To dial directly from an internal Phone Book entry:

1.Press MENU to access the main menu.

2.	Highlight Phone Book and press	OK .
3.	Highlight Find Name and press	OK .
4.	Highlight the entry and press	OK .

5. Highlight the phone number and press	TALK .
Tip: To dial the first phone number in the entry, press	TALK instead of OK in
step 4 above.

Using One-Touch/Two-Touch Speed Dialing

When this feature is activated, you can dial Speed Dial entries by using one key press for locations 2-9 or two key presses for locations 10-99. (See “Setting Speed Dialing” on page 48 and “Assigning a Speed Dial Location” on page 87.)

To use One-Touch Dialing for Speed Dial locations 2-9:

Press and hold the appropriate key for approximately one second. The display confirms that the number has been dialed when it shows “Calling...”.

To use Two-Touch Dialing for Speed Dial locations 10-99:

1.Press the first digit.

2.Press and hold the second digit for approximately one second. The display confirms that the number has been dialed when it shows “Calling...”.

Note: Speed dialing is not available when you are roaming with Call Guard enabled.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone – The Basics 24