Answering Calls

To answer an incoming call:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2. When your phone rings or vibrates, press TALK to answer the incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any digit key.)

Your PCS Phone notifies you of incoming calls in the following ways:

The phone rings or vibrates.

The LED flashes green.

The backlight illuminates.

The screen displays an incoming call message.

If available, the phone number of the caller is displayed.

If the phone number is in your internal Phone Book, the Phone Book entry’s name is displayed.

Tip: To mute the ringer or stop the vibrating, press END or press any of three keys on the side of your phone.

Tip: To answer the call using the speakerphone mode, press .

Answering a Roam Call With Call Guard Enabled

To answer a call when you are roaming and Call Guard is enabled:

 Press TALK and press 1 to answer the call. (See “Call Guard” on page 61 for additional information.)

Note: If your phone is off, incoming calls go to voicemail.

Ending a Call

To disconnect a call when you are finished:

 Close the phone or press END .

Note: When you use the phone with an earphone-microphone or TTY device, you can continue a call even if the phone is closed.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone – The Basics

17

Page 28
Image 28
Toshiba VM4050 manual Answering Calls, Answering a Roam Call With Call Guard Enabled, Ending a Call