TP-Link TL-WR1042ND manual Reboot, Password

TL-WR1042ND300Mbps Wireless N Gigabit Router

4.17.6 Reboot

Choose menu “System Tools → Reboot”, and then you can click the Reboot button to reboot the Router via the next screen.

Figure 4-99 Reboot the Router

Some settings of the Router will take effect only after rebooting, which include

•Change the LAN IP Address (system will reboot automatically).

•Change the DHCP Settings.

•Change the Wireless configurations.

•Change the Web Management Port.

•Upgrade the firmware of the Router (system will reboot automatically).

•Restore the Router's settings to factory defaults (system will reboot automatically).

•Update the configuration with the file (system will reboot automatically.

4.17.7 Password

Choose menu “System Tools → Password”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 4-100.

Figure 4-100 Password

It is strongly recommended that you should change the factory default user name and password of the Router, because all users who try to access the Router's Web-based utility or Quick Setup will be prompted for the Router's default user name and password.

-95-