TL-WR1042ND300Mbps Wireless N Gigabit Router

Figure 4-17

¾Disable Security - If you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security.

¾WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 4-18.

Figure 4-18

Type - you can choose the type for the WEP security on the drop-down list. The default setting is Automatic, which can select Open System or Shared Key authentication type automatically based on the wireless station's capability and request.

WEP Key Format - Hexadecimal and ASCII formats are provided. Hexadecimal format

-35-

Page 44
Image 44
TP-Link manual TL-WR1042ND300Mbps Wireless N Gigabit Router