TL-WR1042ND 300Mbps Wireless N Gigabit Router
-4-
1.4 Panel Layout 1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the Wireless On/Off button are located on the front panel (View from left
to right).
Name Status Indication
Off Power is off.
PWR On Power is on.
On The Router is initializing or maybe has a system error.
Flashing The Router is working properly.
SYS
Off The Router has a system error.
Off The Wireless function is disabled.
WIRELESS Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
On There is a device linked to the corresponding port but there is no
activity.
LAN 1-4
INTERNET
Flashing There is an active device linked to the corresponding port.
Off No storage device or printer is plugged into the USB port.
USB On A storage device or printer has connected to the USB port.
Slow Flash A wireless device is connecting to the network by WPS function.
This process will last in the first two minutes.
On A wireless device has been successfully added to the network by
WPS function.
WPS
Quick Flash A wireless device failed to be added to the network by WPS
function.
Table 1-1 The LEDs description