TP-Link TL-WR1042ND manual Wireless Settings

TL-WR1042ND300Mbps Wireless N Gigabit Router

4.6Wireless

Figure 4-15 Wireless menu

There are five submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function.

4.6.1Wireless Settings

Choose menu “Wireless→Wireless Setting”, and then you can configure the basic settings for the wireless network on this page.

Figure 4-16 Wireless Settings

¾Wireless Router Radio - The wireless radio of the Router can be enabled or disabled to allow wireless stations access. If enabled, the wireless stations will be able to access the Router, otherwise, wireless stations will not be able to access the Router.

¾Wireless Network Name (also called SSID) - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be

-32-