TL-WR1042ND 300Mbps Wireless N Gigabit Router
¾If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure
zIf you are visiting the Router from the main computer, please select Yes, and then click Clone MAC Address.
Figure 3-8 Quick Setup – MAC Clone
zIf you are visiting the Router from another computer, rather than the main computer, please select No, and then enter the main computer’s MAC in the field WAN MAC Address.
Figure 3-9 Quick Setup – MAC Clone
)Note:
1.It’s strongly recommended that you visit and configure the Router from the main computer.
2.To find the main computer’s MAC, please go to Start > Run on your main computer, type in cmd and press Enter. At the command prompt, enter ipconfig/all and press Enter. The MAC will be displayed under Physical Address.（shown in the following figure）
