TP-Link TL-WR1042ND manual Media Server

TL-WR1042ND300Mbps Wireless N Gigabit Router

4.8.3Media Server

Choose menu “USB Settings→Media Server”, and then you can configure Media Server on this page as shown in Figure 4-38.

Figure 4-38Media Server Setting

¾Server Name – The name of this Media Server.

¾Server Status - Indicates the Media Server’s current status, started or stopped. You can click the Start button to start the Media Server and click the Stop button to stop it.

¾Name - The display name of this folder.

¾File System - The file system type on the partition can be FAT32 or NTFS.

¾Folder - The real full path of the specified folder.

¾Delete - You can delete the share folder by click Delete.

To set up your media server, please follow the instructions below:

1.Plug an external USB hard disk drive or USB flash drive into this Router, and then the screen will appear as shown in Figure 4-39.

Figure 4-39Media Server Setting

2.Click the Start button to start the media server, and then the screen will appear as shown in Figure 4-40.

-50-