TP-Link manual TL-WR1042ND300Mbps Wireless N Gigabit Router

TL-WR1042ND300Mbps Wireless N Gigabit Router

Figure 4-55Advanced Security

¾Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood.

¾DoS Protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protection function. Only when it is enabled, will the flood filters be enabled.

) Note:

Dos Protection will take effect only when the Traffic Statistics in “System Tool → Traffic Statistics” is enabled.

¾Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.

¾ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately.

¾Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

-63-