TP-Link TL-WR1042ND manual NSW / ACT nsw.bigpond.net.au, WAN BigPond Cable

TL-WR1042ND300Mbps Wireless N Gigabit Router

Figure 4-10 WAN – BigPond Cable

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.

¾Auth Server - Enter the authenticating server IP address or host name.

¾Auth Domain - Type in the domain suffix server name based on your location. e.g.

NSW / ACT - nsw.bigpond.net.au

VIC / TAS / WA / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.au

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP.

¾Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

¾Connect Automatically - The connection can be re-established automatically when it was down.

-26-