TL-WR1042ND300Mbps Wireless N Gigabit Router

4.In MAC Address field, enter 00-11-22-33-44-AA.

5.Click Save to complete the settings.

Then you will go back to the Host Settings page and see the following list.

4.12.3 Target

Choose menu “Access Control Target”, and then you can view and set a Target list in the screen as shown in Figure 4-71.The target list is necessary for the Access Control Rule.

Figure 4-71 Target Settings

¾Target Description - Here displays the description about the target and this description is unique.

¾Information - The target can be IP address, port, or domain name.

¾Modify - To modify or delete an existing entry.

To add a new entry, please follow the steps below.

1.Click the Add New… button.

2.In Mode field, select IP Address or Domain Name.

3.If you select IP Address, the screen shown is Figure 4-72.

-76-

Page 85
Image 85
TP-Link TL-WR1042ND manual Target Settings