Installing Nodes in Modulus Enclosures
Adding a Secondary 6500PLUS Processor with FLASH
Introduction | When adding another 6500PLUS processor card to a node, be sure that all processor |
| cards are running the same software revision. 6500PLUS processor cards redistributed |
| within a network may contain different revisions of software. |
When To Add Another Processor with FLASH
Before You Begin
Two situations in which you may add an additional 6500PLUS processor card with FLASH memory to a node are when you want to:
•Maintain the current software revision
•Upgrade with software from the new 6500PLUS processor card In both cases, the FLASH Enable Option is required.
These situations apply to the 6507PLUS and 6525PLUS nodes. A 6505PLUS node does not support multiple processor cards.
Follow these steps to access the control terminal port:
Step | Action | Result/Description |
|
|
|
1 | Connect a terminal to a local PAD |
|
| port, and enter the following at the |
|
| (*) prompt: |
|
| .ctp <CR> |
|
|
|
|
2 | Enter the password when you are | The default password is <CR>. |
| prompted. | After you enter the password, the |
|
| Main menu appears. |
|
| For more information about |
|
| accessing the CTP, see the |
|
| Vanguard ONS Basics Protocols |
|
| Manual (T0106). |
|
|
|
Installation |
