Vanguard Managed Solutions 6500 PLUS Preparing Modulus Enclosures for RFI Suppression

	Installing Nodes in Modulus Enclosures
Preparing Modulus Enclosures for RFI Suppression
Introduction
	To meet FCC requirements, the Modulus 18 and Modulus 21 enclosures require
	special RFI suppression hardware. In the Modulus 18 enclosure, the RFI suppression
	scheme differs depending on whether a TRIM card is installed in the unit.
Modulus 18 with
	Figure 2-14shows a Modulus 18 enclosure with a TRIM card. It also shows the
TRIM Card	suppression screen that you need to install.

Snap tab into spring rods on top and bottom of door.

Modulus 18 Door

(Inside View)

	Snap
Honeycomb Mesh RFI Screen	remaining tab
	to door.

Figure 2-14. RFI Suppression Screen (Modulus 18 - with TRIM Card)

Installation 2-49