Vanguard Managed Solutions 6500 PLUS RFI Suppression Straps Modulus 18 No Trim Card

Installing Nodes in Modulus Enclosures

Modulus 18 With	Figure 2-15shows a Modulus 18 with no TRIM cards and the RFI suppression
No Trim Card	straps.

3 Align the top of strap so that screw hole is over bar, insert the screw, and tighten.

1 Remove a screw from

the left and right power supplies.

4Tighten the bottom

screw.

2 Align the bottom of the

strap so it is over the screw hole, insert the screw, and finger tighten.

Figure 2-15. RFI Suppression Straps (Modulus 18 - No TRIM Card)

Installation 2-51