Vanguard Managed Solutions 6500 PLUS installation manual Replacing Processor Card Components

Replacing Processor Card Components

Replacing Processor Card Components

Introduction	You can upgrade and replace components on the 6500PLUS processor card. In both
	standalone and Modulus enclosures, you can:
		• Replace DIMs (data interface modules)
		• Set jumpers on the port interface pins
		• Install single in-line memory modules (SIMMs)
		• Replace a FLASH module
		• Replace the ID Module
		• Replace PROMs
		• Replace the CMEM chip
Processor Card
	Figure 2-17shows the location of these components on a 6500PLUS processor card.
		Note
		The PROMs are located beneath the FLASH Module.

FLASH Module SIMMs

PROM

(underneath FLASH Module)

U83

U40

DIMs	Port Interface Jumpers
Port 1	Port 2

Trim Card

ID Module CMEM Chip

Figure 2-17. 6500PLUS Processor Card

2-54 Installation