Telephone settings
Record sound clips
To record a sound clip using the handset microphone: Step 1: Press the MENU softkey from the idle screen.
Step 2: Press the 
, 
, 
and/or 
NavKeys to choose Ringer, then press the SELECT softkey or the center NavKey/SELECT/
.
Step 3: Press the up or down NavKey 
or 
to choose Record Sound Clip, then press the SELECT softkey or
the center NavKey/SELECT/
.
Step 4: Press the up or down NavKey 
or 
to choose Using Microphone.
Step 5: Press the SELECT softkey or the center NavKey/SELECT/
. The screen will display Record after the tone and a tone will be played.
(Proceed to Step 7 on the next page)
To record a sound clip using the audio cable:
Step 1: Using the audio cable provided, plug the small end into the headset jack on the side of the handset (beneath the small rubber flap) and plug the large end into an audio port 
on your computer. Open a music player (e.g. Window Media player, Realplayer or iTunes) and play a song on the computer. The sound will be transmitted through the speaker of the handset.
Step 2: Press the MENU softkey from the idle screen of the handset.
Step 3: Press the 
, 
, 
and/or 
NavKeys to choose Ringer then press the SELECT softkey or the center NavKey/SELECT/
.
Ringer
Ringer Volume
Ringer Melody
Play Sound Clips
Record Sound Clip
BACKSELECT
Record Sound Clip
Using Microphone
Using Audio Cable
Remaining record time:
2:54
BACKSELECT
Record Sound Clip
Record after the tone
��If there is an incoming call while recording a sound clip, recording will stop automatically.
��You can exit the recording procedure anytime by pressing OFF. The screen will display
Recording deleted and the sound clip will not be saved.
Telephone settings
www.vtechphones.com | 44 |
