VTech IS6110 user manual Troubleshooting

Troubleshooting

Problem	Suggestion
My cordless handset	��	Make sure the power cord is securely plugged into the telephone base. Plug the unit into a
beeps and is not		different working electrical outlet not controlled by a wall switch.
performing normally.	��	Move the cordless handset closer to the telephone base. It may be out of range.
	�� Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and
		plug it back in again. Allow up to one minute for the cordless handset and the telephone base
		to synchronize.
	��	Other electronic products can cause interference to your cordless telephone. Try installing
		your telephone as far away from these electronic devices as possible: wireless routers, radios,
		radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
		computers, kitchen appliances and other cordless telephones.
Common cure for	��	If the unit is not responding normally, try putting the cordless handset in the telephone base or
electronic equipment.		the charger. If it does not seem to respond, try the following (in the order listed):
	�� Disconnect the power to the telephone base.
	�� Disconnect the battery on the cordless handset.
	�� Wait a few minutes before connecting power to the telephone base.
	�� Re-install the battery and place the cordless handset into the handset charger.
	��	Wait for the cordless handset to synchronize its connection with the telephone base. To be
		safe, allow up to one minute for this to take place.
How can I get	��	If you need a replacement, call VTech Communications, Inc. at 1 (800) 595-9511 in the United
replacement parts for		States. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
my IS6110?
		www.vtechphones.com	92

Appendix