Telephone operation
Receiving calls on the Home line
��When the telephone is ringing, press 
/FLASH or the ANSWER softkey
to answer the call. Press 
/SPEAKER if you want to answer using the speakerphone.
After you answer the call, the screen displays the elapsed time of the call. If you subscribe to the caller ID service, see page 80 for caller ID information.
Ending calls on the Home line
While on a call, press OFF to end the call. After a call ends, the screen will show Ended and the duration of the call in hours, minutes and seconds.
Speakerphone operation
The speakerphone provides you a 
/SPEAKER to alternate between speakerphone and normal handset use. The speakerphone icon 
will be shown in the center of the softkey bar while the speakerphone is in use.
Mute
The mute function is used to silence the microphone during a conversation. You will be able to hear the caller, but the caller will not be able to hear you until you press the UNMUTE softkey to resume the conversation. When you hang up, this feature will be canceled.
To mute or unmute the microphone:
During a call, press the MUTE softkey to mute the microphone and the mute icon will be shown in the center of the softkey bar. Press the UNMUTE softkey to resume normal conversation.
Incoming Call
ANSWERMUTE
•When the telephone is ringing, press the OFF or MUTE softkey to silence the ringer temporarily and the ringer off icon
will be shown on the screen. The ringer will ring normally with the next incoming call.
Telephone operation
www.vtechphones.com | 74 |
