Telephone operation
Dialing alphanumeric phone numbers
While entering a phone number in the
the keypad is in numeric input mode by default and 
is shown in the center of the softkey bar. To enter a phone number that has letters (for example a plumbing company’s phone number might be:
555-PLUMBER):
Step 1: Press CAP and 
will be shown in the center of the softkey bar. The next character will be an uppercase letter and then it will return to the numeric input mode.
Double click CAP until 
is shown in the center of the softkey bar to enter multiple
characters as uppercase letters. Double click ALT until 
is shown in the center of the softkey bar to return to the numeric mode.
��To insert a pause, press the PAUSE softkey.
Step 2: When you press 
/FLASH, the letter(s) will be converted into numbers before being dialed and stored in the redial log. For example:
When you press... | This number will be dialed and stored.., |
|
|
A, B or C | 2 |
D, E or F | 3 |
G, H or I | 4 |
J, K or L | 5 |
M, N or O | 6 |
P, Q, R or S | 7 |
T, U or V | 8 |
W, X, Y, or Z | 9 |
|
|
73 | www.vtechphones.com |
