Wolfcraft 6156 manual Attach Tool Tray Router Table Model 6155 Only, AR, black AS, black AT, black

Attach Tool Tray

(Router Table Model 6155 Only)

AR, black (8)

AS, black (8)

AT, black (8)

1.Align holes in legs to holes in corners of tool tray (G). See Figure 12.

2.Use 8 carriage bolts (AR), 8 toothed washers (AS), and 8 hex nuts (AT) to attach the tray to the legs. Tighten securely.

AT

AS

G

AR

Figure 12 (Height-adjustable legs removed for clarity)

Attach Optional, Second Shelf

(Router Table Model 6155

Only)

1.Size of optional, second shelf (not provided) will depend on position of the height-adjustable legs (J). Once adjusted to operating height, measure and cut plywood or medium density fiberboard to fit your stand.

2.With the router table in an upright orientation, place corners of shelf board on each one of the "brackets" that protrudes from the height- adjustable legs. See Figure 13, stand inverted for clarity.

3.Use screws (not provided) to secure the shelf.

Location of optional shelf on corners of height- adjustable legs

Figure 13

18