Wolfcraft 6156, 6155 manual Assembling Fence to the Router Table

WARNING When router table is not in use, always:

1.Place the switch box in OFF position and remove the safety key.

2.Place router power switch in OFF position.

3.Unplug switch box from wall outlet.

4.Remove router bit.

5.Make sure router collet assembly is below router table.

6.Remove and place safety key in a secure location. Remember where you place the safety key.

If the breaker trips, the WARNING router stalls, or the power

fails for any other reason, place the switch box in the OFF position, remove the safety key, and unplug the switch box from the wall outlet.

ASSEMBLING FENCE TO THE ROUTER TABLE

1.Place the fence on the router table with the front of the fence (flat side) facing the front of the router table.

See Figure 30.

2.Insert knob screw into the hole in the tabletop and through the nut (AM) in the fence guide mounted to the underside of the table. Repeat for other knob.

3.Turn knobs clockwise to secure fence in desired position.

AM

		G
		IN
		N
	R
A
W

PUL	L ON
		FF
PU	SH O
	T
RESE

OUTL ETS

G N I N R A W

Figure 30

30