Wolfcraft 6155 manual Securing the Router Table Model 6156 Only

Mount Router (with Square Adaptor Base Plate) to Table

BA, black (4)

Only assemble the router CAUTION to the table after you

have attached it to the square adaptor base plate. Do not attempt to attach the square adapter plate and then the router to the table.

1.With router attached, place the square adaptor base plate underneath the router table inside the area provided and against the metal bosses.

AL

Figure 23

2.If your router has a on/off switch, make sure it faces toward the front of the table for easy access, if needed.

3.Align the holes in the welded nuts on the adaptor base plate to the holes in the bosses.

4.Insert 4 flathead sink screws (BA) through the holes and tighten them securely. See Figure 23.

SECURING THE ROUTER TABLE (Model 6156 Only)

WARNING DO NOT use the router table unless it is firmly

mounted to a stable work surface. Failure to securely mount the router table could lead to serious personal injury and/or property damage.

Secure router table to the work surface using wood screws or sheet metal screws and washers (not provided) through the holes provided. There are 8 mounting holes. See Figure 24.

Figure 24

26