Wolfcraft 6156, 6155 Attach Security Guard Fence, Assemble Push Shoe to Fence, AY, zinc AZ, black

Attach Security Guard Fence

AY, zinc (2)

AZ, black (1)

1.Position the two holes on the security guard (Y) so that they align with the two holes on the fence (V). See Figure 16.

AY

AZ

Y

AY

V

Figure 16

2.Position one cap nut (AY) on one end of pivot pin (AZ). Using a hammer, lightly tap pivot pin until it seats in cap nut.

3.Slide pivot pin (AZ) through holes in fence and security guard. Add second cap nut (AY) and secure on end of pin.

3.Test moveability by moving security guard up and down.

Assemble Push Shoe to Fence

1.Place push shoe assembly onto fence so the slot in the push shoe aligns with rail on fence. See Figure 17.

2.With safety shield in the up position, test moveability of push shoe by sliding it along fence. It should slide with ease.

NOTE: It is recommended that you occasionally lightly lubricate the push shoe and fence sliding surfaces with furniture wax.

NOTE: For best performance, periodically remove any wood chips that accumulate inside the push shoe slot and rail.

Figure 17

20