SAFETY INSTRUCTIONS

Safety items throughout this manual are labeled with WARNING and CAUTION.

WARNING

CAUTION

Means that failure to follow this safety statement may result in extensive product damage, serious personal injury, or death.

Means that failure to follow this safety statement may result in minor or moderate personal injury, or property or equipment damage.

WARNING

READ ALL SAFETY INSTRUCTIONS BEFORE USING

Read the owner's manual carefully. Learn its applications and limitations as well as the specific potential hazards.

GROUND ALL TOOLS (UNLESS DOUBLE INSULATED)

If tool is equipped with an approved 3-conductor cord and a 3-prong grounding type plug to fit the proper grounding type receptacle. The green conductor in the cord is the grounding wire. NEVER connect the green wire to a live terminal.

KEEP AWAY FROM HAZARDOUS

MATERIALS

Normal sparking of the motor could ignite fumes, flammable liquids, or combustibles.

PROTECT YOURSELF AGAINST PERSONAL INJURY

DO NOT operate any tool while under the influence of drugs, alcohol, or any medication.

DRESS FOR SAFETY

Do not wear loose clothing, gloves, neckties, or jewelry, as these items can get caught and draw you into moving parts. ALWAYS wear non-slip footwear. Tie back long hair. Roll long sleeves above the elbow.

WEAR SAFETY GOGGLES

Wear safety goggles (must comply with ANSI Z87.1) at ALL times. Also, use face or dust mask if cutting operation is dusty, and use ear protectors (plugs or muffs) during extended periods of operation.

AVOID ACCIDENTAL STARTING

Make sure all switches are in "OFF" position before plugging in.

NEVER STAND ON TOOL

Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. DO NOT store materials above or near the tool making it necessary to stand on the tool to reach them.

PROTECT AND USE SUITABLE CORDS NEVER carry tool by cord or yank it to disconnect from receptacle. Protect cord from heat, oil, and sharp edges. For temporary outdoor operation, use extension cords intended for outdoor use.

AVOID A DANGEROUS ENVIRONMENT DO NOT use power tools in damp or wet locations or expose them to rain. Keep work area well lit and provide an adequate surrounding work space.

CHECK DAMAGED PARTS

Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

CHECK DIRECTION OF FEED

Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

NEVER LEAVE TOOL RUNNING

UNATTENDED

Turn power off. Do not leave tool until it comes to a complete stop.

3

Page 3
Image 3
Wolfcraft 6155, 6156 manual Safety Instructions