Wolfcraft 6156, 6155 manual Unpacking and Checking Contents, Introduction

WARNING CONTINUED

SECURE ROUTER TABLE

DO NOT attempt to use your router table unless it is fastened firmly to your workbench or rests stably on the floor.

KEEP HANDS AWAY FROM CUTTING AREA

DISCONNECT TOOLS BEFORE SERVICING When changing bits, make sure router is unplugged.

KEEP GUARDS IN PLACE

Be sure guards are in working order, properly adjusted, and aligned.

CAUTION

STORE PROPERLY

Do not store router table outdoors or in a damp location.

KEEP WORK AREA CLEAN ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on or place router table legs on floor surfaces that are slippery from sawdust, oil, water, or wax.

DO NOT FORCE THE TOOL

Do not force tool or attachment to do a job for which it was not designed. It will do the job better and more safely at the rate for which it was designed.

USE CLAMPS TO HOLD WORK WHEN PRACTICAL

Using clamps to hold work is safer than using your hand. It also frees both hands to operate the tool.

DO NOT OVERREACH

Keep proper footing and balance at all times.

MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

USE RECOMMENDED ACCESSORIES Consult this manual for recommended accessories. Follow the instructions that accompany the accessories. The use of improper accessories may cause hazards.

REMOVE ADJUSTING KEYS AND WRENCHES

Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.

ENSURE SAFETY OF OTHERS

Keep visitors and children a safe distance away from the work area, especially when operating a power tool. Visitors should wear the same safety equipment as the operator.

SAVE THESE INSTRUCTIONS

UNPACKING AND CHECKING CONTENTS

IMPORTANT: Separate all parts from packaging materials and check each item against the package contents listed in this manual, found on page 6.

Your wolfcraft® Router Table is shipped complete in one carton. Make sure all items are accounted for before discarding any of the packaging materials.

INTRODUCTION

The wolfcraft® Router Table is designed to provide an economical means to extend the capabilities of your router.

We are certain you will find the wolfcraft® Router Table a valuable addition to your shop.

NOTE: This manual covers assembly instructions, setup, operation, and parts lists for both the Model 6155 Router Table and the Model 6156 Router Table.

4