Xerox N2125 2 Printer Operation Problems continued, Action, Solving Printing Problems, User Guide

Solving Printing Problems

Table 5.2 Printer Operation Problems (continued)

Problem	Action
A printed page does not	• Make certain that the software application you are using to create your print
look like it should.	job is configured properly. Refer to your software documentation.
	• Make sure the correct driver is being used.
	• Send a file containing PCL or PostScript commands to the printer.
	- If your page prints as it should, your printer and interface are functioning
	properly.
	- If your information prints correctly, but doesn't look right, you may have:
	- An error in your command sequence/operator.
	- A missing downloaded font.
	- A mismatched printer option against your host formatting.
	- Command errors may be identified by looking at your input file. You can
	determine which fonts are in the system by printing a PCL or PS Font List.
	You can verify your data setup by printing a Configuration Sheet and
	checking your printer setup.
The requested font for	Print a PCL Font List, or PostScript Font List if the job is PostScript.
the job does not print.	• If fonts print on the Font List, your print job may need correcting.
	• If fonts do not print on the Font List, reload the fonts and print another PCL
	or PostScript Font List.
	Table 5.2 Page 2 of 4

5-26 ❖ User Guide