Xerox N2125 manual 6 Control Panel Menu Options continued, Using the Control Panel, Printing

		Using the Control Panel
Table 3.6 Control Panel Menu Options (continued)
Menu		Description
Tray Menu	Tray Sequence	Groups two or more trays together so the group appears as
(continued)		one logical tray, and defines the order in which the trays will
		be searched to satisfy the input request.
	Custom Size	Defines the paper size that is used in formatting pages
		printed from the tray(s) if Tray N Mode is set to Custom
		(which overrides the tray’s auto size detection mechanism).
	Tray N Mode	Determines whether or not the auto size detection
		mechanism in tray N (where N is the tray number—Tray 1, 2,
		or 3) should be overridden with the setting for Custom Size.
	Config Fuser	Enables the customization of fuser temperature settings
		associated with each paper type (otherwise set automatically
		by the printer). When set to On, each paper type is available
		as a menu item to customize its fuser temperature.
	Plain	Sets the fuser temperature to be associated with the paper
		type Plain (appears only if Config Fuser is set to On).
	Preprinted	Sets the fuser temperature to be associated with the paper
		type Preprinted (appears only if Config Fuser is set to On).
	Letterhead	Sets the fuser temperature to be associated with the paper
		type Letterhead (appears only if Config Fuser is set to On).
		Table 3.6 Page 2 of 14

Chapter 3: Printing ❖ 3-45