98 Chapter 9—Aux Sends

Viewing Aux Send Settings

Settings for the aux sends can be viewed, and certain parameters adjusted on VIEW pages 1 and 2.

1.Use the [AUX] buttons to select an aux send, and then press the MASTER [SEL] button.

AUX appears on the display, indicating that an aux send is selected.

2.Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.

3.Use the cursor buttons to select the parameters, and the PARAMETER wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.

Parameters are explained in the following sections.

01V—Owner’s Manual