Yamaha 01v Copying & Swapping Channel Settings

Copying & Swapping Channel Settings 59

Copying & Swapping Channel Settings

The Channel Copy function is used to copy input channel settings from one channel to another. The Channel swap function is used to swap input channel settings between channels. Copy and Swap can be used with input channels 1 through 16.

1. Use the [VIEW] button to locate the VIEW page shown below.

2.Use the cursor buttons and PARAMETER wheel to select the SOURCE and DESTINATION channels.

3.Use the cursor buttons and [ENTER] button to select a CATEGORY. ALL—All input channel settings.

EQ—EQ settings.

DELAY—Delay settings.

DYNAMICS—Dynamics settings.

FADER—Fader settings.

4.Use the cursor buttons to select COPY or SWAP, and the [ENTER] button to execute the function.

01V—Owner’s Manual