Recalling Dynamics Programs 175
Recalling Dynamics Programs
Dynamics programs 1 through 80 can be recalled.
1.Select the channel to which you want to recall the dynamics program.
Use [SEL] buttons 1 through 16 to select the input channels 1 through 16. To select an aux send, use the [AUX] buttons to select an aux send, and then press the MASTER [SEL] button. To select the stereo output, press the [HOME] button, and then the MASTER [SEL] button.
2.Use the [DYNAMICS] button to locate the Library page, as shown below.
3.Use the PARAMETER wheel or
As each program is selected its dynamics curve is displayed.
The program list order can be set using the LIBRARY LIST ORDER option in prefer- ences (“Setting 01V Preferences” on page 203).
4.Use the cursor buttons to select the RECALL switch, and then press the [ENTER] button.
The Dynamics program is recalled. If the RECALL CONFIRMATION option is turned on in the preferences (“Setting 01V Preferences” on page 203), a confirmation dialog box appears. In this case, select OK, and then press the [ENTER] button to confirm the recall.