36 Chapter 4—Getting Around the User Interface

To adjust the aux 1 send level of input channel 13/14, press the [AUX 1] button, and then operate fader 13/14.

To adjust the aux 1 send level of input channel 20, use the [OPTION I/O] button to locate OPTION page 2, press [SEL] button 20, use the cursor buttons to select the AUX 1 fader, and then adjust it using the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons.

Note: Aux send levels for input channels 17 through 24 can only be set using the virtual faders on OPTION page 2.

Input Channel Effects Send Examples

To adjust the Effect 1 send level of input channel 3, press the [EFFECT 1] button, and then operate fader 3.

To adjust the Effect 1 send level of input channel 13/14, press the [EFFECT 1] button, and then operate fader 13/14.

To adjust the Effect 1 send level of input channel 20, use the [OPTION I/O] button to locate OPTION page 2, press [SEL] button 20, use the cursor buttons to select the EFFECT 1 fader, and then adjust it using the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons.

Note: Effects send levels for input channels 17 through 24 can only be set using the virtual faders on OPTION page 2.

Master Level Examples

To adjust the level of stereo out, press the [HOME] button, and then operate the MASTER fader.

To adjust the AUX 1 master send level, press the [AUX 1] button, and then operate the MASTER fader.

To adjust the EFFECT 1 master send level, press the [EFFECT 1] button, and then operate the MASTER fader.

To adjust the BUS OUT 1 master send level, use the [PAN/ROUT] button to locate PAN/ROUT page 3, use the cursor buttons to select the BUS 1 fader, and then adjust it using the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons.

Note: Bus out master levels can only be set using the virtual faders on PAN/ROUT page 3.

01V—Owner’s Manual