64 Chapter 6—EQ

The EQ can also be adjusted on this page by using the cursor buttons to select parameters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

For Effects Returns 1 & 2

1.Use the effects returns [SEL] buttons to select effects returns 1 and 2.

2.Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ bands, and the F and G controls to adjust the frequency and gain, respec- tively.

If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer- ences” on page 203), the EQ page shown below appears, and the Home fader mode is selected. This page can also be located using the [EQ/ATT] button.

The EQ can also be adjusted on this page by using the cursor buttons to select parameters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

For Aux Sends 1–4

1.Use the Fader Mode AUX buttons to select an aux send.

2.Press the MASTER [SEL] button.

3.Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ bands, and the F and G controls to adjust the frequency and gain, respec- tively.

If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer- ences” on page 203), the EQ page shown below appears, and the Home fader mode is selected. This page can also be located using the [EQ/ATT] button.

The EQ can also be adjusted on this page by using the cursor buttons to select parameters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

When aux sends are paired (“Pairing Aux Sends” on page 101), their EQs are linked.

01V—Owner’s Manual