Viewing Effects Send Settings 127

Viewing Effects Send Settings

Settings for the effects sends can be viewed, and certain parameters adjusted on VIEW pages 1 and 2.

1.Use the [EFFECT 1] or [EFFECT 2] button to select an effects send, and then press the MASTER [SEL] button.

EFF1 or EFF2 appears on the display, indicating that an effects send is selected.

2.Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.

3.Use the cursor buttons to select the parameters, and the PARAMETER wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.

Parameters are explained in the following sections.

Metering Effects Sends

Effects sends signal levels can be metered on the VIEW pages. See“Viewing Effects Send Settings” on page 127 for more information.

01V—Owner’s Manual