| Troubleshooting | 255 | |
|
|
| |
Symptom | Advice |
| |
|
| ||
Added channels to a mute group | Make sure that the mute group is enabled. See “Grouping Mutes” on | ||
but group muting does not work. |
| ||
|
| ||
| EQ settings cannot be stored to preset programs 1 through 40. Try | ||
Cannot store an EQ program. | storing to user programs 41 through 80. See “Storing EQ Programs” | ||
on page 68 for more information. EQ settings of channel 17 through | |||
| |||
| 24 can not be stored. |
| |
|
|
| |
Cannot recall EQ programs to input | EQ programs cannot be recalled to input channels 17 through 24. | ||
channels 17 through 24. | |||
|
| ||
|
| ||
Cannot locate the aux send | Aux send panpots are only available when aux sends are paired. See | ||
panpots. |
| ||
|
| ||
The bus master level faders work in | Probably because the bus outs are paired. See “Pairing Bus Outs” on | ||
unison. |
| ||
|
|
| |
No output from the OMNI OUTs. | Check the OMNI OUT source assignments. See “Assigning Omni |
| |
| |||
|
| ||
|
|
| |
Cannot send channel signals to the | If the effects sends are configured |
| |
fader must be raised in addition to the aux send fader. See “Using the | |||
effects processors. | |||
| |||
|
| ||
|
|
| |
The effects send meters indicate |
|
| |
that signals are being sent to the | Processed signals are returned via the effects returns. See “Returning | ||
effects, but the processed sounds |
| ||
cannot be heard. |
|
| |
|
| ||
Cannot store effects programs. | Effects settings cannot be stored to preset programs 1 through 42. Try | ||
storing to user programs 43 through 99. See “Storing Effects Pro- | |||
|
| ||
|
| ||
Cannot recall effects programs 19 | These effects programs use the HQ. PITCH and FREEZE type effects | ||
and can only be recalled to Effect 2. See “Preset Effects Programs” on | |||
and 42 to Effect 1. | |||
| |||
|
| ||
|
|
| |
Cannot feed effects return 1 to | This is to prevent signal loops. See “Using the Effects” on page 123 for | ||
Effect 1, or effects return 2 to Effect | |||
| |||
2. |
| ||
|
| ||
|
| ||
Cannot store dynamics programs. | Dynamics settings cannot be stored to preset programs 1 through 40. | ||
Try storing to user programs 41 through 80. See “Storing Dynamics | |||
|
| ||
|
| ||
Cannot store to scene memory 00. | Scene memory 00 is a | ||
| |||
|
| ||
|
| ||
Cannot store mix scenes. | Is the selected scene memory protected? See “Protecting Scene Mem- | ||
| |||
|
| ||
|
|
| |
Cannot recall mix scenes. | Only scene memories that contain data can be recalled. |
| |
|
| ||
Help! I recalled a mix scene by | Use the Undo function to return to the previous mix settings. See | ||
mistake. | “Undoing Mix Scene Recalls” on page 189 for more information. |
| |
|
| ||
The scene memory number keeps | This is because a scene memory other than the one last recalled has | ||
been selected but not recalled. See “Scene Memory Display Area” on | |||
flashing. | |||
| |||
|
| ||
|
| ||
Recalling a mix scene doesn’t | Perhaps these channels are safe channels? See “Recalling Scene Data | ||
update some channels. |
| ||
|
|
| |
The specified fade time has no | Fade Time settings must be stored in mix scenes before they take |
| |
effect. | effect. See “Setting a Fade Time” on page 191 for more information. | ||
|
|
| |
|
|
|