156 Chapter
Distortion and delay effects in series.
Parameter | Range | Description | |
|
|
| |
DST TYPE | DST1, DST2, OVD1, | Distortion type (DST = distortion, OVD = overdrive) | |
OVD2, CRUNCH | |||
|
| ||
|
|
| |
DRIVE | Distortion drive | ||
|
|
| |
MASTER | Master volume | ||
|
|
| |
TONE | Tone control | ||
|
|
| |
N.GATE | Noise reduction | ||
|
|
| |
DLY BAL | Distortion and delay balance (0% = distortion, 100% | ||
= delayed distortion) | |||
|
| ||
|
|
| |
DELAY | Delay time | ||
|
|
| |
DLY NOTE | *1 | Used in conjunction with TEMPO to determine DELAY | |
|
|
| |
FB.GAIN | Feedback gain (plus values for | ||
feedback, minus values for | |||
|
| ||
|
|
| |
HI.RATIO | |||
|
|
| |
FREQ. | Modulation speed | ||
|
|
| |
MOD | *2 | Used in conjunction with TEMPO to determine FREQ. | |
NOTE | |||
|
| ||
|
|
| |
DEPTH | Modulation depth | ||
|
|
| |
TEMPO*3 | Used in conjunction with NOTE parameters to | ||
determine DELAY and FREQ. | |||
|
| ||
|
|
| |
1. |
| (Maximum value depends | |
on the tempo setting) |
| ||
2. |
|
| |
3.For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.
MULTI FILTER
Parameter | Range | Description |
|
|
|
TYPE 1 | HPF, LPF, BPF | Filter 1 type: low pass, high pass, band pass |
|
|
|
TYPE 2 | HPF, LPF, BPF | Filter 2 type: low pass, high pass, band pass |
|
|
|
TYPE 3 | HPF, LPF, BPF | Filter 3 type: low pass, high pass, band pass |
|
|
|
FREQ. 1 | 28 | Filter 1 frequency |
|
|
|
FREQ. 2 | 28 | Filter 2 frequency |
|
|
|
FREQ. 3 | 28 | Filter 3 frequency |
|
|
|
LEVEL 1 | Filter 1 level | |
|
|
|
LEVEL 2 | Filter 2 level | |
|
|
|
LEVEL 3 | Filter 3 level | |
|
|
|
RESO. 1 | Filter 1 resonance | |
|
|
|
RESO. 2 | Filter 2 resonance | |
|
|
|
RESO. 3 | Filter 3 resonance | |
|
|
|