174 Chapter 13—Dynamics Processors

Storing Dynamics Programs

Custom dynamics settings can be stored in user programs 41 through 80.

1.Select the channel whose dynamics processor settings you want to store as a program.

Use [SEL] buttons 1 through 16 to select the input channels 1 through 16. To select an aux send, use the [AUX] buttons to select an aux send, and then press the MASTER [SEL] button. To select the stereo output, press the [HOME] button, and then the MASTER [SEL] button.

2.Use the [DYNAMICS] button to locate the Library page, as shown below.

3.Use the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select a user program from 41 through 80.

The program list order can be set using the LIBRARY LIST ORDER option in prefer- ences (“Setting 01V Preferences” on page 203).

4.Use the cursor buttons to select the STORE switch, and then press the [ENTER] button.

The Title Edit dialog box appears. If the STORE CONFIRMATION option is turned off in the preferences (“Setting 01V Preferences” on page 203), the Title Edit dialog box does not appear and the dynamics program is stored.

5.Title the dynamics program.

See “Title Edit Dialog Box” on page 37 for more information.

6.Select OK, and then press the [ENTER] button.

The dynamics program is stored.

01V—Owner’s Manual