Yamaha 01v manual 161

			Effects Parameters	151
	REV->SYMPHO.
	Reverb and symphonic effects in series.
	Parameter	Range	Description
	REV TIME	0.3–99.9 s	Reverb time
	INI.DLY	0.0–500.0 ms	Initial delay before reverb begins
	HI.RATIO	0.1–1.0	High-frequency reverb time ratio
	DENSITY	0–100%	Reverb density
	FREQ.	0.05–40.00 Hz	Modulation speed
	NOTE	*1	Used in conjunction with TEMPO to determine FREQ.
	DEPTH	0–100%	Modulation depth
	MOD.DLY	0.0–500.0 ms	Modulation delay time
	WAVE	Sine, Tri	Modulation waveform
	REV BAL.	0–100%	Reverb and symphonic reverb balance (0% =
			symphonic reverb, 100% = reverb)
	HPF	Thru, 21 Hz–8.0 kHz	High-pass filter cutoff frequency
	LPF	50 Hz–16.0 kHz, Thru	Low-pass filter cutoff frequency
	TEMPO*2	25–300 bps	Used in conjunction with NOTE to determine FREQ.
1.

2.For more information about the FREQ., NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.

REV->PAN

Reverb and auto-pan effects in parallel.

Parameter	Range	Description
REV TIME	0.3–99.9 s	Reverb time
INI.DLY	0.0–500.0 ms	Initial delay before reverb begins
HI.RATIO	0.1–1.0	High-frequency reverb time ratio
DENSITY	0–100%	Reverb density
FREQ.	0.05–40.00 Hz	Modulation speed
NOTE	*1	Used in conjunction with TEMPO to determine FREQ.
DEPTH	0–100%	Modulation depth
DIR.	*2	Panning direction
WAVE	Sine, Tri, Square	Modulation waveform
REV BAL.	0–100%	Reverb and panned reverb balance (0% = panned
		reverb, 100% = reverb)
HPF	Thru, 21 Hz–8.0 kHz	High-pass filter cutoff frequency
LPF	50 Hz–16.0 kHz, Thru	Low-pass filter cutoff frequency
	Hz
TEMPO*3	25–300 bps	Used in conjunction with NOTE to determine FREQ.
1.

2.L<->R, L—>R, L<—R, Turn L, Turn R

3.For more information about the FREQ., NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.

01V—Owner’s Manual