20 Chapter 3—Touring the 01V
Inputs & Outputs
Input and output connectors are located on the top and rear panels.
Top Panel
PHANTOM +48V OFF ON | PHANTOM +48V OFF ON |
INPUT (BAL)
13 | 15 | –10dBV (UNBAL) |
L | |
| | |
14 | 16 | R | |
| |
| | IN | OUT |
2TR
PHONES
AINPUT (BAL) 1–12
Input channels 1 through 12 feature balanced XLR-3-31-type and balanced phone jack connectors, both with a nominal input range of –60 dB to +10 dB. Phantom powering (+48 V) is supplied to the XLR connectors, with master on/off switches for connectors 1 through 6 and 7 through 12. Phone jacks, which can also be used with unbalanced phone plugs, have priority over the XLR-type connectors, so when a phone plug is inserted, the XLR-type connector is disconnected.With their high sensitivity and 26 dB PAD switches, these inputs can handle a wide range of signals, from condenser micro- phones to “hot” line levels.
1 (ground)
3 (cold)
2 (hot)
| Tip (hot) |
1/4" TRS phone plug | Ring (cold) |
| Sleeve (ground) |
BINPUT (BAL) 13–16
Input channels 13 through 16 feature bal- anced phone jack connectors, with a nominal input range of –20 dB to +10 dB. These inputs are designed for use with line-level sources, and can also be used with unbalanced phone plugs. The stereo outputs of an external effects processor or other stereo device can be connected here.
| Tip (hot) |
1/4" TRS phone plug | Ring (cold) |
| Sleeve (ground) |
