Using Solo

81

Using Solo

Input channels 1 through 24 and the effects returns can be soloed as follows.

1.Connect a monitoring system (amp, speakers) to the MONITOR OUT.

2.Make sure that the MONITOR–2TR IN switch is set to MONITOR.

3.Set the MONITOR OUT LEVEL control midway.

If you are using headphones, set the PHONES LEVEL control midway.

4.Use the [SETUP] button to locate SETUP page 2, explained previously, and configure as necessary.

For Input Channels 1–16

5. Use [SOLO] buttons 1 through 16 to solo channels.

For Input Channels 17–24

6.Press the [OPTION I/O] button.

7.Use [SOLO] buttons 17 through 24 to solo channels.

For Effects Returns 1 & 2

8.Use the effects returns [SOLO] buttons to solo effects returns 1 and 2.

When a channel is soloed, its [SOLO] button and the main SOLO indicator flash.

If SOLO SETUP LISTEN is set to AFL, you must raise the soloed channel’s fader. Oth- erwise, you won’t hear anything.

01V—Owner’s Manual