142 Chapter 12—Effects

ECHO

Stereo delay with crossed feedback loop.

Parameter

Range

Description

 

 

 

DELAY L

0.0–1350.0 ms

Left channel delay time

 

 

 

NOTE L

*1

Used in conjunction with TEMPO to determine DELAY

L

 

 

 

 

 

 

 

Left channel feedback gain (plus values for

FB.G L

–99 to +99%

normal-phase feedback, minus values for

 

 

reverse-phase feedback)

 

 

 

DELAY R

0.0–1350.0 ms

Right channel delay time

 

 

 

NOTE R

*1

Used in conjunction with TEMPO to determine DELAY

R

 

 

 

 

 

 

 

Right channel feedback gain (plus values for

FB.G R

–99 to +99%

normal-phase feedback, minus values for

 

 

reverse-phase feedback)

 

 

 

FB.D L

0.0–1350.0 ms

Left channel feedback delay time

 

 

 

NOTE FBL

*1

Used in conjunction with TEMPO to determine FB.D L

 

 

 

 

 

Left to right channel feedback gain (plus values for

L->R FB.G

–99 to +99%

normal-phase feedback, minus values for

 

 

reverse-phase feedback)

 

 

 

FB.D R

0.0–1350.0 ms

Right channel feedback delay time

 

 

 

NOTE FBR

*1

Used in conjunction with TEMPO to determine FB.D R

 

 

 

 

 

Right to left channel feedback gain (plus values for

R->L FB.G

–99 to +99%

normal-phase feedback, minus values for

 

 

reverse-phase feedback)

 

 

 

HI.RATIO

0.1–1.0

High-frequency feedback ratio

 

 

 

HPF

Thru, 21 Hz–8.0 kHz

High-pass filter cutoff frequency

 

 

 

LPF

50 Hz–16.0 kHz, Thru

Low-pass filter cutoff frequency

 

 

 

TEMPO*2

25–300 bps

Used in conjunction with NOTE parameters to

determine DELAY L, DELAY R, FB.D L, and FB.D R

 

 

 

 

 

1.

 

(Maximum value depends on

the tempo setting)

 

2.For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.

CHORUS

Chorus effect.

Parameter

Range

Description

 

 

 

FREQ.

0.05–40.00 Hz

Modulation speed

 

 

 

NOTE

*1

Used in conjunction with TEMPO to determine FREQ.

 

 

 

DEPTH

0–100%

Modulation depth

 

 

 

MOD.DLY

0.0–500.0 ms

Modulation delay time

 

 

 

WAVE

Sine, Tri

Modulation waveform

 

 

 

TEMPO*2

25–300 bps

Used in conjunction with NOTE to determine FREQ.

1.

2.For more information about the FREQ., NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.

01V—Owner’s Manual