116 Chapter 11—Omni Outs

About the Omni Outs

The 01V’s four omni outs can be used as aux send outputs, bus out outputs, additional stereo outputs, or post-fader direct outputs for input channels 1 through 16. Each omni out features a variable output delay of up to 300 milliseconds.

Omni Outs

Omni out signals are converted to analog

 

 

 

 

OMNI OUT

 

using 18-bit D/A converters, and then output

 

+4dB (BAL)

 

via balanced 1/4-inch phone jacks with a

4

3

2

1

+4 dB nominal output level.

 

 

 

 

 

 

 

 

 

Assigning Omni Outs

Omni outs are initially assigned to aux sends 1 through 4. They can also be assigned to the bus outs, the left and right channels of the stereo output, or post-fader direct outputs of input channels 1 through 16.

1.Use the [PAN/ROUTING] button to locate PAN/ROUT page 4, a shown below.

2.Use the cursor buttons to select the OMNI OUT parameter boxes, and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select sources for the omni outs.

3.Press the [ENTER] button to confirm your selection.

01V—Owner’s Manual