Yamaha 01v EQ Specs, Bypassing the EQ, Resetting the EQ

66 Chapter 6—EQ

EQ Specs

The following table contains the EQ specs.

	Low	Lo-Mid1	Hi-Mid1	High
Gain (G)		–18.0 dB to +18.0 dB (0.5 dB steps)2
Frequency (F)	21 Hz–20.1 kHz (1/12 octave steps, 120 steps)
Q	HPF, 10.0–0.10			LPF, 10.0–0.10
	(41 steps),	10.0–0.10 (41 steps)		(41 steps),
	L.SHELF			H.SHELF

1.Four-band EQs only (low and high bands only on input channels 17 through 24).

2.When the low and high EQ bands are configured as HPF and LPF, their gain controls function as filter on and off switches.

Bypassing the EQ

The selected channel’s EQ can be turned on or off using the EQ ON switch on the EQ page (OPTION page 2 for channels 17 through 24), or the [ENTER] button. While the EQ page is displayed, the [ENTER] button turns the EQ on

or off regardless of the cursor position.

Resetting the EQ

ENTER

To reset all the EQ parameters on the selected channel to their initial values, press the [HIGH] and [LOW] buttons simultaneously.

The following table contains the initial EQ values.

	Low	Lo-Mid1	Hi-Mid1	High
Gain (G)	0 dB	0 dB	0 dB	0 dB
Frequency (F)	125 Hz	1.00 kHz	4.00 kHz	10.0 kHz
Q	L.SHELF	0.70	0.70	H.SHELF

1. Four-band EQs only (low and high bands only on input channels 17 through 24).

01V—Owner’s Manual